What will the contact be used in? Provide a general description of the use of the contacts and the device(s) it will be installed in. Contacts mounted to: Fixed Stationary Both...types of assembly backs (blades). Material the backings are made from:   RIVET Material/Spec.   Quantities Delivery   DIM. TOL. HD HT SD SL HS HL SR Is a particular shape other than round required? No Yes Method used to open or close contacts Springs   Thermocouple   Cam   Magnetic Number of times contacts will open and close (cycle) per minute , AC or DC What temperature ranges will be expected of contacts? °F Check the following operating conditions that may apply to the contacts during the intended or normal operationto the contacts during the intended or normal operation: High humidity Dust Oils Fumes Closing action of the contacts will be Wipe Roll Sliding Butt Will any arc suppression be used? None   Oil Immersion Arc chute Magnetic Other Specify the life expectancy of this contact: Provide data to the following chart.  Circuit's state Normal Operation: Speed Open Voltage Speed Closed Amperes (max) Notes: While closing: Speed Open Voltage Speed Closed Amperes (max) Notes While Opening: Speed Open Voltage Speed Closed Amperes (max) Notes Name        (Required) Company  (Required) Address1   Address2   City           State             Zip       e-mail       Tele          (Required) Fax           URL